MHP WNK Benutzerhandbuch
5
GENERAL INSTRUCTIONS
This installation guide provides you with easy to fol-
low illustrations and instructions to assemble your
MHP Gas Barbecue Grill.
low illustrations and instructions to assemble your
MHP Gas Barbecue Grill.
Before you start assembling and using your MHP
Gas Barbecue Grill we recommend that you read
through all precautions, safe guards and instruc-
tions to avoid any personal injury or property
damage.
Gas Barbecue Grill we recommend that you read
through all precautions, safe guards and instruc-
tions to avoid any personal injury or property
damage.
Check Local Codes. Contact your local LP dealer or
Natural Gas company for recommended installation
procedures and regulations. If there are no local
codes, installation must conform to the latest National
Fuel Gas Code: ANSI Z 223.1. For Canada, installa-
tion must comply with local codes and/or Standard
CAN/CGA-B-149-1 for natural gas installation and
CAN/CGA- B-149-2 for propane installation.
Natural Gas company for recommended installation
procedures and regulations. If there are no local
codes, installation must conform to the latest National
Fuel Gas Code: ANSI Z 223.1. For Canada, installa-
tion must comply with local codes and/or Standard
CAN/CGA-B-149-1 for natural gas installation and
CAN/CGA- B-149-2 for propane installation.
For LP Gas Models the supplied Gaslow GS-801
Regulator must be used. Any replacement pressure
regulator or hose assembly must meet or exceed the
specifications of the Gaslow GS-801 Regulator.
Regulator must be used. Any replacement pressure
regulator or hose assembly must meet or exceed the
specifications of the Gaslow GS-801 Regulator.
For Natural Gas Models the grill is designed to oper-
ate at a pressure of 7” water column (W.C.) (1.75
kPa). Check your gas utility for local pressure. Pres-
sures other than approximately 7” W.C. could affect
the performance of your grill.
ate at a pressure of 7” water column (W.C.) (1.75
kPa). Check your gas utility for local pressure. Pres-
sures other than approximately 7” W.C. could affect
the performance of your grill.
ASSEMBLY INSTRUCTIONS
There are 9 steps to assembling your MHP Gas Bar-
becue Grill: The mounting, LP tank mounting, control
panel, gas supply connection, grill lid, lid handle, side
shelves, and rock grate, cooking grid and warming
rack.
becue Grill: The mounting, LP tank mounting, control
panel, gas supply connection, grill lid, lid handle, side
shelves, and rock grate, cooking grid and warming
rack.
The grill itself is partially assembled with the Burner,
Venturis, Ignitor Collector Box and the Gaslow Regu-
lator installed.
Venturis, Ignitor Collector Box and the Gaslow Regu-
lator installed.
The JNR and WNK grills are specifically designed to
fit the five mounting methods: Cart, In-Ground Post,
Deck/Patio Base, Optimum Console and Built-in. The
TJK Grill is supported by the Optimum Console
mounting and Built-in.
fit the five mounting methods: Cart, In-Ground Post,
Deck/Patio Base, Optimum Console and Built-in. The
TJK Grill is supported by the Optimum Console
mounting and Built-in.
You will need the following tools to assemble
your grill:
your grill:
•
A Phillips head screwdriver
•
A standard flat head screwdriver
•
Two 7/16” wrenches or sockets
STORAGE
Turn gas OFF at the LP cylinder (or at the shut OFF
valve in the case of Natural Gas) when the MHP Gas
Barbecue Grill is not in use.
valve in the case of Natural Gas) when the MHP Gas
Barbecue Grill is not in use.
Do not store spare LP cylinders under the MHP Gas
Barbecue Grill.
Barbecue Grill.
Store disconnected LP cylinders outdoors in a well-
ventilated area, do not store in shed, building, garage
or in any enclosed area.
ventilated area, do not store in shed, building, garage
or in any enclosed area.
Do not install your MHP Gas Barbecue Grill
in or on recreational vehicles and/or boats.
in or on recreational vehicles and/or boats.
Never use your MHP Gas Barbecue Grill near
combustible surfaces, including roof over-
hangs, roofs, vinyl siding and window shut-
ters. Maintain at least a 6-foot clearance.
combustible surfaces, including roof over-
hangs, roofs, vinyl siding and window shut-
ters. Maintain at least a 6-foot clearance.
Use this barbecue outdoors in a well-
ventilated area.
ventilated area.
Do not use your MHP Gas Barbecue Grill in a
shed, garage, building, breezeway or any
other confined area.
shed, garage, building, breezeway or any
other confined area.
Do not use any kind of combustible material
on or near the top, bottom, back or sides of
the grill. Maintain at least a 2-foot clearance.
on or near the top, bottom, back or sides of
the grill. Maintain at least a 2-foot clearance.
Leak test all gas supply line connections.
Do not let children operate a gas grill.
Keep the area around the grill clear of com-
bustible vapors or liquids such as gasoline.
bustible vapors or liquids such as gasoline.
When operating the grill do not leave unat-
tended. Keep children and pets away.
tended. Keep children and pets away.
Keep fuel supply hose and electrical supply
cord away from any heated surface.
cord away from any heated surface.
OPERATING SAFEGUARDS
General Instructions
SAFETY
YOUR GRILL IS DESIGNED FOR OUTDOOR USE ONLY.
It should also not be used in an enclosed area such as a shed
or garage because combustion uses available oxygen and dis-
charges carbon monoxide.
The grill must be located no closer than 24" from any combus-
tible surface behind or to the sides. Grill should not be located
under overhead unprotected combustible surfaces.
Keep the area around the grill clear of combustible materials,
flammable vapors or liquids such as gasoline.
Do not obstruct the flow of combustion and ventilation air.
or garage because combustion uses available oxygen and dis-
charges carbon monoxide.
The grill must be located no closer than 24" from any combus-
tible surface behind or to the sides. Grill should not be located
under overhead unprotected combustible surfaces.
Keep the area around the grill clear of combustible materials,
flammable vapors or liquids such as gasoline.
Do not obstruct the flow of combustion and ventilation air.