Uniflame CBT802W Benutzerhandbuch

Seite von 16
Outdoor Charcoal Barbecue Grill  Model No. CBT802W Series
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
Assembly Instructions (continued)
  Never use charcoal that has been pre-treated with lighter fluid. 
Use only a high grade plain charcoal, charcoal/wood mixture, lump 
charcoal or cooking wood.
First Use 
1.  Make sure all labels, packaging and protective films have been removed from the grill. 
2.  Remove manufacturing oils before cooking on this grill for the first time, by operating the 
grill for at least 15 minutes with the lid closed. This will “heat clean” the internal parts and 
dissipate odors. 
Lighting Instructions
  Check to make sure the air vents are free of debris and ash before 
using the grill.
1. Open lid and vents. 
2. Make sure bottom bowl is empty.
3. Remove cooking grid.
4.  Arrange charcoal briquettes or other fuel on the 
charcoal grid to the “Fill Line”. (Figure 1)
5. Light per instructions on fuel package.
6.  Allow fuel time to ash into glowing coals before 
cooking.
  CAUTION: When using a liquid starter 
always check bottom bowl before 
lighting. Fluid can collect in the bottom 
bowl and could ignite resulting in a fire. 
  CAUTION: Never add lighting fluid to hot or even warm coals as 
flashback may occur causing serious injury or damage to property.
Direct Cooking 
Cooking directly over hot coals is ideal for searing in juices and grilling food requiring less than 
25 minutes of grilling time, such as steaks, hamburgers, hot dogs, chicken parts, vegetables 
and fruit. 
1.  Open lid and remove cooking grid.  
2.  Load and light charcoal per “Lighting Instructions” section. Leave lid open. 
3.  While wearing protective gloves, carefully spread hot coals evenly across charcoal grid with a 
long handle tool. 
4.  While wearing protective gloves replace cooking grid, close lid and allow grill to preheat. 
5.  While wearing protective gloves open lid and place food onto cooking grids above the hot 
coals with long handle tongs. 
6.  With lid open or closed, cook until desired internal food temperatures are achieved. 
Note: If additional briquettes are needed, remove food from cooking grid and while wearing 
protective gloves remove the cooking grid and place additional briquettes without disturbing the 
hot coals. Carefully replace cooking grid and food. 
7.  Allow charcoal to burn out by closing lid and all vents. Except in the case of an emergency, 
do NOT pour water on hot coals. 
Indirect Cooking 
Not cooking directly over hot coals is ideal for slow cooking and grilling foods requiring more 
than 25 minutes such as most roasts, loins, chops, whole chickens, turkey, fish and baked 
goods. 
1.  Open lid and remove cooking grid.  
2.  Load and light charcoal per “Lighting Instructions” section. Leave lid open. 
3.  While wearing protective gloves, carefully spread hot coals to the outsides of charcoal grid 
with a long handle tool. 
4.  While wearing protective gloves replace cooking grid, close lid and allow grill to preheat. 
5.  Wear protective gloves to open lid. Use long handled tools to place food onto cooking grids 
above the areas without hot coals. 
6.  With lid closed, cook until desired internal food temperatures are achieved. 
Note: If additional briquettes are needed, remove food from cooking grid and while wearing 
protective gloves remove the cooking grid and place additional briquettes without disturbing the 
hot coals. Carefully replace cooking grid and food. 
7.  Allow charcoal to burn out by closing lid and all vents. Except in the case of an emergency, 
do NOT pour water on hot coals. 
For more tips on indirect cooking please see “Tips for Better Cookouts and Longer Grill Life”.
Operating Instructions
Figure 1
9
Insert Charcoal Grid and Cooking Grid
10
Insert Warming Rack