2WIRE 340 Merkblatt

 

     

 

Missing or light color 
stripes on prints.

 Refer to the cleaning procedure “Cleaning for light 
stripes:  printhead.”

Ink streaks or oil on front, 
back or edges of print.

Do not print on both sides of the media.  Ink may be 
offset onto the internal paper path. 

Refer to “Identifying a cleaning procedure” for a complete 
list of cleaning procedures.

Transparency print 
quality poor.

Use Tektronix premium transparency media.  Use the 
transparency tray for printing transparencies and specify 

 

 in the Tektronix printer driver.Refer to 

“Transparency printing” for more information.

600 x 300 dpi prints look 
like 300 dpi quality.

600 x 300 dpi mode is for paper only and is not included 
in the Phaser 340 standard configuration. Refer to “Print 
quality modes” for more information.

Print is wrinkled.

You may be using paper that is too thick or thin. Refer to 
“Paper and transparency media” for more information.

Paper edge is rippled.

You may be using the wrong grain paper.  Load 
long-grained paper.  Refer to “Paper and transparency 
media” for more information.

Printed image is shifted, 
the wrong color, or 
margins are not correct.

 

■

 

You may have to make adjustments in the application 

or print driver.  

 

■

 

Make sure that the paper is not curled.  Refer to the 

cleaning procedure “Cleaning for ink smears: paper 
feed rollers.”

 

■

 

Microsoft PowerPoint users need to leave 

 

 in the 

 

 set to 

 

.

Colors do not print as 
expected.

 

Refer to the 

 

Phaser 340 Drivers and Utilities Printing 

Reference

 

 manual for details on how to select TekColor 

color corrections.  You may have attempted to print 
transparency loaded in a paper tray but did not specify 
transparency as the print media in the printer driver.