2WIRE 5500 Benutzerhandbuch

Seite von 5
Novell NetWare
Phaser® 5500 Laser Printer
3-37
Requirements
Verify that you:
Are operating a Windows-based system with CentreWare  DP software installed and at 
least one printer driver installed
Are a NetWare Network Administrator, an administrative person with ADMIN/
SUPERVISOR, or ADMIN/SUPERVISOR EQUIVALENT within login rights to the 
NetWare Server(s) servicing the Phaser printer
Have a basic knowledge of NetWare
Novell NetWare Troubleshooting Quick Check
1.
Verify that the printer is plugged in, turned On, and connected to an active network.
2.
Verify that the printer is receiving network information by monitoring the LEDs on the 
back of the device. When the printer is connected to a functioning network and receiving 
traffic, its link LED is green, and its amber traffic LED is flashing rapidly.
3.
Verify that the client is logged into the network and printing to the correct print queue. 
4.
Verify that the user has access to the Phaser printer queue.
5.
Verify that the Phaser printer NetWare print queue exists, is accepting jobs, and has a print 
server attached. If it does not, use the Setup Wizard in CentreWare DP to reconfigure the 
print queue.
6.
Print the “Configuration Page”. Verify that Printer Server is enabled. Set the frame type 
to the frame type your NetWare server is using.
Note
To determine your NetWare IPX frame type, type config at the Novell console screen. 
On networks using multiple IPX frame types, it is critical that the frame type be set 
correctly.
7.
 if the above steps fail to resolve the printing 
problem.
Novell NetWare Troubleshooting Step-By-Step
These procedures eliminate cabling, communication, and connection problems associated with 
network connected printers. The steps are divided into two groups:
Novell NetWare Hardware Step-by-Step
Novell NetWare Software Step-by-Step
Note
Novell NetWare Software Step-by-Step assumes that you are connected to a Novell 
NetWare network with a Windows OS installed on the client workstation. When both of 
these procedures are completed, print a test page from your software application. If the test 
page prints, no further system troubleshooting is necessary.