Kenwood KDC-5047U Benutzerhandbuch
8
|
KDC-BT50U/ KDC-5047U/ KMR-440U
Audio Preset Recall
Recalling the sound setup registered by
1
Select the source
Press the [SRC] button.
For how to select source item, refer to
For how to select source item, refer to
2
Enter Audio Control mode
KDC-5047U
KMR-440U
Press the [AUDIO] button.
KDC-BT50U
1) Press the [FNC] button.
2) Turn the Control knob to select
2) Turn the Control knob to select
, and then press the [ENTER] button.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings” ➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
follows.
“Detailed Settings” ➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4
Select the Audio Preset Recall
Turn the Control knob to select “Recall”, and
then press the [ENTER] button.
then press the [ENTER] button.
5
Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Recall Completed” is displayed.
“Recall Completed” is displayed.
6
Exit Audio Control mode
Press the [
] button for at least 1 second.
Audio Preset Memory
Registering the value setup by Audio Control.
1
Setup Audio Control
Setup the
.
2
Enter Audio Control mode
KDC-5047U
KMR-440U
Press the [AUDIO] button.
KDC-BT50U
1) Press the [FNC] button.
2) Turn the Control knob to select
2) Turn the Control knob to select
, and then press the [ENTER] button.
3
Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings” ➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
follows.
“Detailed Settings” ➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4
Select the Audio Preset Memory
Turn the Control knob to select “Memory”, and
then press the [ENTER] button.
then press the [ENTER] button.
5
Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Memory Completed” is displayed.
“Memory Completed” is displayed.
6
Exit Audio Control mode
Press the [
] button for at least 1 second.
⁄
•
To use this function, this unit must be powered for more
than one hour.
than one hour.
•
Register 1 pair of Audio Preset Memory. You cannot register
by the source.
by the source.
•
When you press the Reset, all the sources will be the setting
value which is registered.
value which is registered.
•
The following items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF
Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF
Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”
Audio Adjustments