Vermont Casting RAD- VTBB Benutzerhandbuch

26

26

�����
��������
����

Rear Log

LG488

2.  Install the rear log by plac-

ing it on the ember bed 
toward the back of the 
firebox. (Fig. 48) The log 
should touch the back wall 
of the firebox. When the 
log is in place, the two (2) 
notches on the bottom of 
the log rest on the two (2) 
ribs on the back side of the 
ember bed. (Fig. 49)

�����
���������
����

Ribs for Rear Log

Ember Bed

Rib Flat Spot for 
Front Left Log

Rib and Flat Spot 
for Front Right Log

LG487

�����
����������
����

Front Left Log

Front Right Log

LG489

3.  Install the front left and right logs 

(Fig. 50) by placing them on the 
ribs shown in Figure 49. Make 
sure the logs line up with the flat 
spots on the ember bed intended 
for location purposes. (Fig. 49)

4.  Install the left cross log by engag-

ing the hole on the bottom with 
the pin on the left side of the rear 
log. Set front side of cross log on 
notch in ember bed. (Fig. 51)

5.  Install the right cross log by 

engaging the hole on the bottom 
with the pin on the right side of 
the rear log. Set front edge of 
cross log on ember bed as shown 
in Figure 51.