Honeywell NetAXS Benutzerhandbuch
10
www.honeywell.com
Configuring via the Web Server
Configuring the System
Configuring the System
2.1 Overview
This chapter explains the NetAXS™ configuration functions as accessed via the NetAXS™ web
server. These functions should be performed only by the NetAXS™ system administrator or service
personnel.
server. These functions should be performed only by the NetAXS™ system administrator or service
personnel.
Caution:
The sequence of NetAXS™ configuration tasks is critical. If the sequence given below is not
followed, the NetAXS™ system cannot be successfully configured.
The flow chart in
shows the order in which to perform the administrative functions.
Figure 2-1: NetAXS™ System Configuration Flow Chart
Configure the Panel
Configuration > System > Host/Loop Communications (
Configuration > System > Network (
)
Configuration > System > General (
)
Configuration > System > Site Codes (
Configure the Time Zones
Configuration > Time Management > Time Zones (
)
Configure the Access Levels
Configuration > Access Levels (
Assign Access Levels to Cards
Cards > Add Cards (
Configure the Doors
Configuration > Doors > Reader (
Configuration > Doors > Output (
Configuration > Doors > Inputs (
)
Create the Cards
Cards > Add Cards (
)