Honeywell NetAXS Benutzerhandbuch
Configuring via the Web Server
Configuring the System
NetAXS™ Access Control Unit User’s Guide, Document 800-04410, Revision A
55
2.7.2 Outputs Tab
This tab enables you to configure the four NetAXS™ auxiliary outputs (outputs 5-8) that are
physically located on the panel board, and the outputs on downstream NX4OUT boards daisy-chained
to Terminal Block 10. A NetAXS™ panel supports a maximum of four NX4OUT boards, and each
board provides two inputs and 16 outputs. The downstream outputs are numbered 17-80.
Click
physically located on the panel board, and the outputs on downstream NX4OUT boards daisy-chained
to Terminal Block 10. A NetAXS™ panel supports a maximum of four NX4OUT boards, and each
board provides two inputs and 16 outputs. The downstream outputs are numbered 17-80.
Click
Outputs
to display the Auxiliary Output screen for the on-board outputs:
Figure 2-21: Configuration > Other I/O & Groups > Outputs Tab
The Outputs tab enables you to:
• Configure the following for each of the auxiliary outputs -- on board the panel as well as
downstream:
– Name
– Pulse time
– Name
– Pulse time