Honeywell NetAXS Benutzerhandbuch

Configuring via WIN-PAK
Adding a New NetAXS™ Panel

The NetAXS™ Gateway panel’s baud rate is set configured via the NetAXS™ web server (see 
the NetAXS™ Access Control Unit Installation Guide for instructions). When you set the Loop 
Type in the QSW to 485 ACK-NAK, you define the baud rate to be 19.2 kilobits per second. 
This baud rate and the panel’s baud rate must match to communicate properly. For WIN-PAK 
SE or WIN-PAK PE systems, you can adjust the baud rate of the N-485 device to 115 kilobits 
per second for optimum performance.

To add a NetAXS™ panel, first create the panel in the WIN-PAK Quick Start Wizard, and then 
complete the configuration manually with the WIN-PAK Panel Configuration screen.

Add a new panel by selecting its Loop and configuring the following from the Quick Start Wizard 
Panel screen:

• Panel type (Select N1000-4X/PW2000-4X from the dropdown list)
• Panel name (Loop[Loop number]-Panel [Panel address]
• Panel address (Select from the dropdown list)

Each panel on a communication loop must have a unique address. The address must correspond 

with the address that is set by DIP switches on the panel.

After adding the NetAXS™ panel via the QSW, you must update the Reader and Input interlocks to 
match them with the default wiring of the NetAXS™ panel. Proceed to “

“ on page 67 and make the necessary changes.