Wow Wee 8000 Benutzerhandbuch

Playing the control function / 
Roboremote software updates

After you upload your control functions to your Roboremote software, you can use the 
Roboremote buttons to action your robot.

 Make sure your WowWee robot is turned on.

To playback your control function:
 

•  Point Roboremote towards your robot 

 

  and press the Roboremote button 

 

  to activate your pre-programmed 

 

  control function.

 

  Your robot(s) should play 

 

  back the movements 

 

  in the control function 

 

  you created using the 

 

  Roboremote software.

 The range from which Roboremote can control your WowWee robot is 

approximately the same as when you use the robot’s original remote controller and can 
vary, therefore consult the user manual of your robot for more details.

 Make sure your Roboremote is pointing at your WowWee robot for the 

duration of the playback of your control function(s), otherwise your robot will not be 
able to receive signals from the Roboremote. 

 To have your robot continually repeat the control function, press and hold the 

button for half a second to which you saved the program. The LED indicator will cycle 
through the different colors as you hold the button down to indicate that it is repeating 
the control function.

The Roboremote software will periodically check for updates, for instance to add new 
codes for newly released WowWee robots. When there are updates available for the 
software, the web update feature will automatically download and install any updates, 
including updated help files. 

This feature requires that your computer has an Internet connection.

16