Renesas R5S72621 Benutzerhandbuch
![Renesas](https://files.manualsbrain.com/attachments/59153266feca598c11e08bf1f143ccfcf45441a4/common/fit/150/50/d3d06de51d338eb4f916b44a9629f9d48697a59cd7344be40cf24bae01c5/brand_logo.gif)
Section 15 Serial Communication Interface with FIFO
R01UH0134EJ0400 Rev. 4.00
Page 725 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
7 ER 0 R/(W)* Receive Error
Indicates the occurrence of a framing error, or of a
parity error when receiving data that includes parity.*
parity error when receiving data that includes parity.*
1
0: Receiving is in progress or has ended normally
[Clearing conditions]
ER is cleared to 0 a power-on reset
ER is cleared to 0 when the chip is when 0 is
ER is cleared to 0 when the chip is when 0 is
written after 1 is read from ER
1: A framing error or parity error has occurred.
[Setting conditions]
ER is set to 1 when the stop bit is 0 after checking
whether or not the last stop bit of the received
data is 1 at the end of one data receive
operation*
2
ER is set to 1 when the total number of 1s in the
receive data plus parity bit does not match the
even/odd parity specified by the O/
E bit in SCSMR
Notes: 1. Clearing the RE bit to 0 in SCSCR does
not affect the ER bit, which retains its
previous value. Even if a receive error
occurs, the receive data is transferred to
SCFRDR and the receive operation is
continued. Whether or not the data read
from SCFRDR includes a receive error
can be detected by the FER and PER bits
in SCFSR.
previous value. Even if a receive error
occurs, the receive data is transferred to
SCFRDR and the receive operation is
continued. Whether or not the data read
from SCFRDR includes a receive error
can be detected by the FER and PER bits
in SCFSR.
2. In two stop bits mode, only the first stop
bit is checked; the second stop bit is not
checked.
checked.