A&D GP-102K Benutzerhandbuch

 

 31

 
 

5  Confirm that there is nothing on the pan and press the 

PRINT key. The balance measures the zero point and 

displays the measured value. Do not allow vibration or 
drafts to affect the balance. 

  The balance displays the target weight value. 

6  Place the displayed target weight on the pan and press 

the PRINT key. The balance measures the target weight 
and displays the measured value. Do not allow vibration 
or drafts to affect the balance. 

7 The balance displays  end . Remove the weight from the 

pan. 

8  The balance displays  glp  and outputs “Calibration 

Test Report” using the RS-232C interface or stores the 
calibration test data in memory. For details on the 
calibration test report format, refer to “10-2 GLP Report”. 

9  The balance will automatically return to the weighing 

mode.