Epson 1810P Benutzerhandbuch

Follow these guidelines if you’re having trouble displaying an image. 

If you don’t see the image you are trying to project, try the following: 

■

Make sure the cables are connected correctly, as described 
beginning on page 35.

■

Make sure the 

Power

 light is green and not flashing and the A/V 

mute slide (lens cover) is open. 

■

If you’ve connected more than one computer and/or video source, 
you may need to press the 

Source Search

 button on the 

projector’s control panel or 

Search

 button on the remote control 

to select the correct source. (Allow a few seconds for the projector 
to sync up after pressing the button.)

■

If you’re using a PC notebook, press the function key on your 
keyboard that lets you display on an external monitor. It may be 
labeled 

CRT/LCD

 or have an icon such as 

. You may have to 

hold down the 

Fn

 key while pressing it. Allow a few seconds for 

the projector to sync up after changing the setting. 

If you’re projecting from a notebook, and you can’t see your image on 
the projection screen and on your computer at the same time, follow 
these guidelines.

■

On most systems, there’s a function key that lets you toggle 
between the LCD screen and the projector, or display on both at 
the same time. It may be labeled 

CRT/LCD

 or have an icon such as 

. You may have to hold down the 

Fn

 key while pressing it. 

Allow a few seconds for the projector to sync up after changing 
the setting. 

User's Guide - 1810.book  Page 19  Monday, September 10, 2007  6:39 PM