Xerox DP 1015 Benutzerhandbuch

In this configuration, the projector displays data (such as 
spreadsheets or text files) from your computer. Video and audio 
are not available.

1. Make sure the projector and computer are turned off.

2. Remove the video adapter from the back of the projector.

3. Using the M1DA/VGA and USB cable, connect the M1DA 

connector to the projector’s M1DA port. Connect the VGA 
connector to the VGA port on the computer.

4. Connect the USB connector to the USB port on your computer. 

You can then use the remote control as a remote mouse.

5. Plug the power cord into the projector and then into an 

electrical outlet.

6. Turn on the projector first, and then the computer.

Your DP1015 projector works best when the computer 

screen resolution is set to 1024 x 768 or less. To reset the 
computer screen resolution, see “Setting the Screen Resolution” 
on page 35.

Video Adapter (Removed)

M1DA/VGA and USB cable

Power Cord

M1DA Connector

USB and VGA connectors