Xerox DP 1015 Benutzerhandbuch

Zooms in (enlarges) the image.
Remote used as a mouse: Go to previous 
page.

Press in to activate image correction for 
images that are wider at the top or bottom due 
to tilting the projector. Press the     keys to 
adjust the image.
Not recommended for spreadsheets or text 
displays to avoid text distortion.

Zooms out (reduces) the image.
Remote used as a mouse: Go to next page.

Turns projector power on and off.

Activates the remote control as a mouse. The 
green LED indicator on the Mode button turns 
on indicating mouse active mode. Press again 
to turn off mouse mode. A USB cable must be 
connected to the projector for the mouse mode 
to work.

Press to display the OSD menus. Press again 
to exit the OSD menus.

Press to view the current video image. 
If you have multiple video sources connected, 
press again to select among the sources.

Hides image being displayed and displays a 
blank blue screen. Press again to resume 
display of the image. Typically used for a 
pause in a presentation.

Automatically adjusts the projected image to 
the optimum settings for the attached 
components.

The infrared emitter is at the top of the remote control 

near the laser pointer. It has a range of 9m (29.5 feet). Do not 
block the infrared emitter. If the projector does not pick up the 
signals from the remote control, make sure the emitter and 
sensor on the projector are not blocked and that the emitter is 
within range.