Cub Cadet 928 SWE Benutzerhandbuch

Snow thrower controls and features are described below and 

illustrated  in Fig. 4-1. 
NOTE:  For detailed information on all engine controls, refer to 

the separate Briggs & Stratton Engine Operator’s Manual.

The shift lever is located in the right side of the 

handle panel and is used to determine ground 

speed and direction of travel.

There are six forward (F) speeds. Position one (1) is 

the slowest and position six (6) is the fastest. 

There are two reverse (R) speeds. One (1) is the 

slower and two (2) is the faster.

The choke control is found on the top of the engine and is 

activated by rotating the knob clockwise. Activating the choke 

control closes the choke plate on the carburetor and aids in 

starting the engine.

The ignition key is a safety devise. It must be fully inserted in 

order for the engine to start. Remove the ignition key when the 

snow thrower is not in use.

 Do not turn the ignition key in an attempt to start 

the engine. Doing so may cause it to break.