Woods Equipment MZ2661K Benutzerhandbuch

a)  Park the machine on a smooth, level surface.  

Raise the deck to the transport position.

b)  Lower the deck onto a pair of equal height blocks 

A under the rear corners of the deck.  Place 
another pair of adjustable blocks B under the 
front of the deck so that the deck top is pitched 
forward 1/8”.

NOTE: The front and rear of the deck are at different 
heights.

c)  Measure the height of the blade cutting edge 

above the ground.  Remove pin C and set the 
height of cut lever D to that height.

d)  Loosen nuts I at all four corners of the deck.

NOTE:  This will relieve tension on chains H.

e)  Loosen the jam nuts E on the height of cut clips 

F and adjusting screws G.  Turn the adjusting 
screws G until the play is taken out of the chains 
H at all four corners.  Tighten the jam nuts E 
against the clips F and at the adjusting screws G.  
Retighten nuts I at this time.