OKI 430dn Benutzerhandbuch
Paper recommendations > 30
P
OSTCARDS
The manufacturer of this printer recommends the following guidelines when selecting
postcards for use in your printer:
>
Always manually feed single postcards using the Manual Feed Tray or Multi Purpose
Tray, depending on your printer model.
>
Use unfolded double postcards.
>
Use postcards designed for use in laser type printers
>
Do not use postcards used for ink jet printers.
>
Do not use stamped or picture postcards.
I
NSTALLING
PAPER
P
APER
T
RAY
1.
Remove the paper tray from the bottom of the printer and place plain paper (1) in
the tray, keeping the level of the paper in the tray below the paper full guide
arrowheads shown on the paper guides (2). For loading A4 or Legal size paper, push
the lever (4) in the arrow direction and extend the paper tray using the rear paper
support (5).
NOTE
If you are topping up the paper in a paper tray, it is recommended that you
remove the remaining paper from the tray first then add the new paper stock
followed by the paper you removed. This ensures that the oldest paper is used
first to help prevent paper jams.
If you are topping up the paper in a paper tray, it is recommended that you
remove the remaining paper from the tray first then add the new paper stock
followed by the paper you removed. This ensures that the oldest paper is used
first to help prevent paper jams.
NOTE
Load letter headed paper face down and top edge towards the front of the
paper tray (3).
Load letter headed paper face down and top edge towards the front of the
paper tray (3).
1
2
3
4