OKI 430dn Benutzerhandbuch

Seite von 84
Consumables and maintenance > 65
I
MAGE
 
DRUM
 
LIFE
The life of an image drum depends on a number of factors, including temperature and 
humidity, the type of paper used, and the number of pages per job.
The image drum should last approximately 25,000 pages continuous printing. This number 
is approximate because different numbers of pages are printed each time and the 
environmental conditions and the paper type used may vary.
W
HEN
 
TO
 
REPLACE
 
THE
 
IMAGE
 
DRUM
When the drum reaches 90% of its life, a CHANGE DRUM message is displayed in the operator 
panel LCD. Change the image drum when the print becomes faint or begins to deteriorate.
R
EPLACING
 
THE
 
IMAGE
 
DRUM
.
1.
Press the cover release and open the printer’s top cover fully.
2.
Holding it by its top centre, remove the used image drum and toner cartridge, out of 
the printer.
WARNING
>
Never expose the image drum to an open flame. It can cause an 
explosion and you can be burned.
>
Be sure to switch off and unplug the machine before accessing 
the interior of a machine for cleaning, maintenance or fault 
clearance. Access to a live machine’s interior can cause electric 
shock.
NOTE
>
It is recommended that you change the toner cartridge and clean the LED 
array at the same time as you change the image drum.
>
The B430dn model has been illustrated below. The principles are the same 
for all the models of this printer.
WARNING!
If the printer has been powered on, the fuser may be hot. This area 
is clearly labelled. Do not touch.