Ariston OK 997E LDP AUS S Benutzerhandbuch

Seite von 20
20
AUS
Troubleshooting
195102565.03
06/2013 - XEROX FABRIANO
Problem
Possible cause
Solution
The appliance has just been 
connected to the electricity mains 
or there has been a blackout.
Set the clock.
A programmed cooking mode 
does not start.
There has been a blackout.
Reprogram the cooking mode.
Only the high luminosity 
“Clock button” is lit.
The appliance is in standby mode Press any button to exit 
standby mode.
The temperature inside the oven 
is higher than the suggested  
value for the selected mode. 
Wait for the oven to cool down.
Fan-assisted cooking has been 
selected and the food looks burnt.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
foods to burn.
We recommend switching
dripping pan positions halfway
through cooking.
The “Clock button” and the
digits on the display flash.
An automatic mode has been
selected. “Hot” appears on the
display and cooking does not
start.
NOTICE
Do not place 
or rest anything 
on the open door
Make sure that the racks 
and dripping pans have been 
inserted fully before closing the door
Please read the manual 
carefully for information 
regarding the automatic 
cleaning (pyrolytic) cycle
GB