Intel X25-M SATA II, SSD, 80GB SSDSA2MH080G1C Merkblatt

Produktcode
SSDSA2MH080G1C
Seite von 2
Intel® Mainstream SATA Solid-State Drive
1.  Active power is measured during execution of MobileMark 2007 Productivity 2007 benchmark. Drive will initiate DIPM request to the host if idle for 25 msec whether or not standby 
or sleep command is received. If DIPM request is acknowledged drive will enter idle power mode.
INFORMATION  IN  THIS  DOCUMENT  IS  PROVIDED  IN  CONNECTION  WITH  INTEL
®
  PRODUCTS.  NO  LICENSE,  EXPRESS  OR  IMPLIED,  BY  ESTOPPEL  OR  OTHERWISE,  
TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, IN-
TEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING 
LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLEC-
TUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life-saving, or lifesustaining applications. Intel may make changes to specifications and product descriptions at any 
time, without notice.
Copyright © 2008 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries. 
*Other names and brands may be claimed as the property of others.
Printed in the United States.    0808/SD/HBD/PDF    319661-001US 
www.intel.com
For more information, visit 
www.intel.com/go/ssd
.
Technical Specifications
Model Name
Intel® X18-M Mainstream SATA Solid-State Drive
Intel® X25-M Mainstream SATA Solid-State Drive
Capacity
80 GB and 160 GB
NAND Flash Components
Intel® Multi-Level Cell (MLC) NAND Flash Memory 
10 Parallel Channel Architecture with 50nm MLC ONFI 1.0 NAND
Bandwidth
Sustained Sequential Read: up to 250 MB/s
Sustained Sequential Write: up to 70 MB/s
Read Latency
85 microseconds
Interface
SATA 1.5 Gb/s and 3.0 Gb/s
Form Factor
X18-M: 1.8¨ Industry Standard Hard Drive Form Factor
X25-M: 2.5¨ Industry Standard Hard Drive Form Factor
Compatibility
SATA revision 2.6 compliant. Compatible with SATA 3 Gb/s with  
Native Command Queuing and SATA 1.5 Gb/s interface rates
Life Expectancy
1.2 million hours Mean Time Before Failure (MTBF)
Power Consumption
Active: 150 mW Typical (PC workload
1
)
Idle (DIPM): 0.06 W Typical
Operating Shock
1,000 G/0.5 ms
Operating Temperature
0°C to +70°C
RoHS Compliance
Meets the requirements of EU RoHS Compliance Directives
Product Health Monitoring
Self-Monitoring, Analysis and Reporting Technology (SMART)  
commands, plus additional SSD monitoring
Two Options. No Worries.
Intel® Mainstream Solid-State Drives are available in either 2.5¨ (Intel® X25-M Mainstream SATA Solid-State Drive) or 1.8¨ 
(Intel® X18-M Mainstream SATA Solid-State Drive) standard hard drive form factors. And all Intel Mainstream SSDs are 
tested and validated on the latest Intel-based notebook and desktop platforms for your peace of mind.