Lightolier 4SB324 Merkblatt
A
B
Body Dia.
C
45°
6
5
4
3
Architectural Decorative
4SB324
(28) (35) (42)
Page 1 of 1
Pendalux Suspension 3 Cables to Swivel Stem Basic Canopy
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Specifications
1. Suspension Size: For optimum performance, testing recommends luminaire
total OAL (overall length) in proportion to the Body diameter. For close-to-
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
Note: 3 Cable suspension cannot be used with Cirrus Pendalux Series.
ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.
Note: 3 Cable suspension cannot be used with Cirrus Pendalux Series.
2. Stem Wires: Equipped with 120” of leads with keyed connectors for quick
connection to Body wiring.
3. Suspension: Swivel (central) stem, 5/8” steel tube. Die-Cast Ball hanger
attached.
4. Cables: Reflector Bowl is suspended from a central pointon three 1/16”
stainless steel cables.
5. Mounting Strap (Cross Bar): Die-formed galvanized steel.
6. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
6. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball
hanger on stem that fits into cross bar allows installation on ceilings with
slope up to 45 degrees. Complies with California Earthquake Code.
slope up to 45 degrees. Complies with California Earthquake Code.
7. Cutting Jig: All suspensions are equipped with a Patent Pending cutting jig
that simplifies cutting of center stem pipe in the field.
Options & Accessories
If a longer overall length is desired, use a Suspension paired with a larger Body.
If an overall length of greater than 42" is desired, use an Extension Stem. Order
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.
Complete Luminaire consists of Body and Suspension: Order each separately.
3 Cables to Single Stem Suspension, with Swivel, Basic Canopy.
Catalogue
Nominal Overall
Nominal
Suspension (Center Stem)
Number
Length (A)*
Length (B)*
and Canopy Finish
4SB324PB
17 7/8”
13 3/8”
Polished Brass
4SB324SB
17 7/8”
13 3/8”
Satin Brass
4SB324SN
17 7/8”
13 3/8”
Satin Nickel
4SB324WH
17 7/8”
13 3/8”
White
4SB328PB
21 11/16”
16 1/4”
Polished Brass
4SB328SB
21 11/16”
16 1/4”
Satin Brass
4SB328SN
21 11/16”
16 1/4”
Satin Nickel
4SB328WH
21 11/16”
16 1/4”
White
4SB335PB
27 5/16”
20 1/2”
Polished Brass
4SB335SB
27 5/16”
20 1/2”
Satin Brass
4SB335SN
27 5/16”
20 1/2”
Satin Nickel
4SB335WH
27 5/16”
20 1/2”
White
4SB342PB
32 5/8”
24 1/2”
Polished Brass
4SB342SB
32 5/8”
24 1/2”
Satin Brass
4SB342SN
32 5/8”
24 1/2”
Satin Nickel
4SB342WH
32 5/8”
24 1/2”
White
* Add this length (A) to Body length (C) from Body Spec Sheet(s) to get Total Luminaire Nominal OAL.
Mounting
Mounts directly to 4" outlet box, using crossbar hanger, supplied.
Note: Additional Luminaire support plate provided with 35/42”Dia. Body to
allow Luminaire to be supported independent of outlet box.
allow Luminaire to be supported independent of outlet box.
Labels
cULus Listed, suitable for Damp Locations.