Lightolier SL402A Benutzerhandbuch

 

1-150W T7 CMH (M142) Double Ended

120V (electronic)

Stainless Steel & Etched Glass 

1-150W T7 CMH (M142) Double Ended

277V (electronic)

Stainless Steel & Etched Glass 

1-150W T7 CMH (M142) Double Ended

120/277/347V (mag)

Stainless Steel & Etched Glass 

Optical System : Single lamp powers an upper wide spaced indirect optic and a lower

Lampholder : RX7s, double ended base.

narrow spaced direct sand-blasted optic.  Glass shield redirects light into the space. 

Electronic Ballast : Electronic ballast maintains constant lamp

Upper wide spaced spun Alzak optic with clear glass micro switch protected.  Narrow

characteristics throughout the life of the lamp and through a wide range

spacing spun Alzak downlight optic. Bottom glass sandblasted outer ring with clear

of operating voltages.  Ballasts available for 120 volts and 277 volts

centre.

operation.  No universal ballast option.

Stainless Steel Construction : Quality all stainless steel form and hardware.

Microswich : Remote, turn off electricity during maintenance into the

Hardware : Exposed hardware adds high design element to the form.

lamp compartment.

Ballast : New low wattage CWA magnetic or electronic ballast assure long lamp 

H1 : Electronic MH / CMH 120V

life and stable operation of the ceramic metal halide lamp source.

H2 : Electronic MH / CMH 277V

Ballast Compartment : Stainless steel construction with removeable ballast  cover

Magnetic Ballast : CWA (Constant Wattage Autotransformer) with

Hollow rods shield wiring to optical chamber.

triple tap 120/277/347 volts operation.  Ballast maintains steady lamp

Optical Chamber : Circular brushed stainless steel construction and all stainless

operating characteristics for longer lamp life and color stability.

steel hardware, with clear Borosilicate glass at top and sand blasted Borosilate glass at

H5 : Magnetic CWA MH 120/277/347V

bottom.

Ceramic Lamp Source : CMH lamp source assures stable color over the life of 

the lamp and longer lamp life.

For wall unit, see Zylinder Wall SL403.

Large Glass : Sand blasted glass suspended between the two chambers.  Hollow

Fuse : 2 Amps internal fusing.  Consult your Lightolier representative. 

threaded rods joined together to hold the glass in position.

Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347

Dome Reflector :  For a better direct distribution pattern, the Dome Reflector can be

volts.

installed onto the Large Glass.  See the appropriate photometry on reverse side of sheet.
 

Stainless steel : Brushed high quality stainless steel alloy.

Mounting : Suitable for mounting on standard octogonal box.  Must be held in 

UL "c/us" Listed.  For dry locations only.

place by additional hardware to support heavy weight luminaire. 
Luminaire Weight : 39 lbs (magnetic), 36.5 lbs (electronic).

WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN,  MATERIALS AND FINISH, IN ANY WAY

THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.