Triarch 31900/1 Merkblatt

  

ASSEMBLY AND MOUNTING INSTRUCTION 

                                            For 31900/1 

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and 
identify all parts prior to building the unit. Each part is identified on the drawingfor reference. 
 
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item 
for any reason. Please repack the unit using the original carton and inserts. 
 
STEP 1:Unpack all the parts and Classify 

them according to the illustration shown 

at the side.Place the parts on a scratch 

-free surface;

 

 

Socket Collar

Socket Ring

Bulb

 

 

STEP 2: Make sure the power is turned Off 

at the wall outlet box where the fixture is 

to be installed.Secure the cross bar to the 

wall junction box using the junction box 

screws; 

 

STEP 3: Use the wire nuts to Connect the 

positive and negative wires. Connect the 

Ground wire to the junction Box ground 

port;  

 

STEP 4: Secure the fixture to the Wall 

outlet box using ball nut; 

 

STEP 5: Install the glass shades and 

Secure Them with the socket rings and 

socket collars; 

 

STEP 6: Install the correct bulb (not 

provided);