Smeg DO10PSS-5 Benutzerhandbuch

 

 

32 

 

 

Cooking duration time: the 2

nd

 button 

 can be used to set the cooking time. Before setting it, turn 

the thermostat to the cooking temperature of choice and the function selector knob to any setting.  To 
set the cooking time, proceed as follows:

 

- 

Press the 

 key for 1 to 2 seconds; the pointer will move to 12 o’clock (Fig. 

1). 

- 

Use the 

  and 

 keys to set the cooking time; whenever the 

 key is 

pressed, 1 minute will be added to the cooking time, and every 12 minutes a 
new inside segment will light up (figure 2 shows a cooking time of 1 hour). 

1 

- 

Once the required time has been set, cooking will start about 6 seconds after 
the last time the  

 

.  key is pressed. 

 or 

- 

Once cooking has started, the display will show the current time, 
represented by the constantly on segments, and the minutes left until 
cooking finishes, represented by the flashing segments (every flashing 
segments indicates 12 minutes of cooking time left). 

- 

When the end of the cooking time is reached, the timer will switch off the 
oven heating elements, the alarm will start and the numbers on the dial will 
flash. 

2

- 

The cooking time can also be reset by deleting the program set; pressing the 
central key 

  for 1 or 2 seconds will delete the time set and the oven will 

have to be switched off by hand. 

 

 

Cooking start: as well as setting a cooking duration time, the user can also set the cooking start time 
(up to 12 hours after the current time). To set the cooking start/end time, proceed as follows.

- 

Set the cooking duration time as described in the previous point. 

 

- 

Within 6 to 7 seconds after the last time the 

 or 

 keys are pressed, press the 

 key to set 

the cooking start time. The display will show the current time with the inside segments indicating 
the cooking end time illuminated. Use the 

 and 

 keys to set the cooking start time. 

- 

6 to 7 seconds after the last time a key is pressed, the display will show the current time and the 
cooking start and end times, indicated by the illuminated inside segments.  The segments on the 
display will be constantly on until the current time is the same as the cooking start time. As soon 
as the current time reaches the cooking start time set, all the inside segments will start to flash, 
indicating that the oven has started cooking. 

- 

When the end of the cooking time is reached, the timer will switch off the oven heating elements, 
the alarm will start and the numbers on the dial will flash. 

- 

To reset the entire program, keep the central key 

 pressed for 1 or 2 seconds: if cooking has 

already started the oven will have to be switched off by hand.

-  The image on the right shows an example of programming: the current time 

is 7.06 and cooking is programmed to start at 8 o'clock and finish at 9. 

 

-  At 8 o'clock, the inside segments between 8 and 9 will start to flash and the 

hour pointer will remain still. 

 

 

 

Models with analogue/digital programmer feature a "DEMO" function which deactivates the heating 
elements while leaving the other functions unchanged. To activate it, simply press the 

, 

, and 

 

keys and keep them held down for 3-4 seconds. A confirmation buzzer will inform the user that the 
function is active. When the “DEMO” function is active, the number 6 on the clock flashes at regular 
intervals. To deactivate it, simply repeat the same procedure.