Panasonic Model No. SC-ALL2 Merkblatt

Seite von 2
Accessories
∏ 1 AC mains lead
Bluetooth
®
 operations
Preparation
≥ Turn on the Bluetooth
®
 feature of the device and place 
the device near this unit.
1.Touch [ ].
2.Select “SC-ALL2” from the Bluetooth
®
 device’s 
Bluetooth
®
 menu.
3.Start playback on the Bluetooth
®
 device.
To restore the settings to 
the factory defaults
You need to perform a factory reset if you want to clear 
and reset the memory contents.
– If you want to restore the network settings, perform a 
network reset 
(see on the reverse - Network Reset).
1.Touch and hold [Í/I] for more than 4 seconds.
2.While still holding [Í/I], touch and release 
[NET].
3.During the reset process, “--:--” will be  
displayed.
4.The unit will turn off.
“-- --” appears and the reset is complete.
Precautions
Unit
≥ To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified 
service personnel.
– Do not let metal objects fall inside this unit.
– Do not place any item on top of this unit.
AC mains lead
≥ To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the 
voltage printed on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the plug.
– Do not use a damaged mains plug or socket outlet.
≥ The mains plug is the disconnecting device. 
Install this unit so that the mains plug can be unplugged from 
the socket outlet immediately.
Unit
≥ Do not place sources of naked flames, such as lighted candles, 
on this unit.
≥ This unit may receive radio interference caused by mobile 
telephones during use. If such interference occurs, please 
increase separation between this unit and the mobile telephone.
≥ This unit is intended for use in moderate climates.
Placement
≥ Place this unit on an even surface.
≥ To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet 
or in another confined space. Ensure this unit is well 
ventilated.
– Do not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high temperatures, 
high humidity, and excessive vibration.
AC mains lead
≥ Do not use AC mains lead with other equipment.
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for 
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the 
replacement fuse has a rating of 5-ampere and that it is approved 
by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the 
fuse.
If the plug contains a removable fuse cover you must ensure that it 
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a 
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains 
plug (figures A and B). Confirm the AC mains plug fitted and follow 
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
NORSK
Produkt
≥ For å redusere faren for brann, elektrisk støt eller skade på 
apparatet:
– Utsett ikke produktet for regn, fukt, drypping eller sprut.
– Ikke plasser objekter som er fylt med væske, som vaser, på 
apparatet.
– Bruk kun anbefalt tilbehør.
– Fjern ikke deksler.
– Reparer ikke denne enheten selv, overlat service til 
kvalifisert servicepersonell.
Vekselstrømnett
≥ Nettstøpselet er trukket ut fra denne enheten. 
Installer denne enheten slik at nettstøpselet umiddelbart kan 
trekkes fra stikkontakten.
Produkt
≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
≥ Dette apparatet er beregnet for bruk under moderate 
klimaforhold.
Plassering
≥ For å redusere faren for brann, elektrisk støt eller skade på 
apparatet:
– Ikke plasser apparatet i en bokhylle, et innebygget kabinett 
eller et annet lukket sted. Pass på at produktet er godt 
ventilert.
– Apparatets ventilasjonsåpninger må ikke dekkes til med 
aviser, duker, gardiner eller lignende.
Model number suffix “EB” denotes UK model.
For further dedicated help, support and advice 
about your ALL Series product please visit: 
http://panasonic.jp/support/global/cs/audio/ALL/
index.html
(This site is in English only.)
WARNING
1
Top view
Display
blinking
1
2
Top view
Top view
Display
blink 4 times
CAUTION
Caution for AC Mains Lead
Safety information for customers in Norway
ADVARSEL
FORSIKTIG
Figure A
Figure B
Fuse cover
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
This symbol indicates separate 
collection of waste electrical and 
electronic equipment.
More detailed information is 
contained in “Operating 
Instructions<Full version>”.
The Bluetooth
®
 word mark and logos are registered trademarks 
owned by Bluetooth SIG, Inc. and any use of such marks by 
Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective owners.
The Wi-Fi CERTIFIED
TM
 Logo is a certification mark of Wi-Fi 
Alliance
®
. The Wi-Fi Protected Setup
TM
 Identifier mark is a 
certification mark of Wi-Fi Alliance
®
. “Wi-Fi
®
” is a registered 
trademark of Wi-Fi Alliance
®
. “Wi-Fi Protected Setup
TM
”, 
“WPA
TM
”, and “WPA2
TM
” are trademarks of Wi-Fi Alliance
®
.
Google Play and Android are trademarks of Google Inc.
App Store is a service mark of Apple Inc.
All other trademarks are trademarks of their respective owners.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic 
Corporation,
(2) the software owned by third party and licensed to Panasonic 
Corporation,
(3) the software licensed under the GNU General Public 
License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General 
Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under 
the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope 
that it will be useful, but WITHOUT ANY WARRANTY, without 
even the implied warranty of MERCHANTABILITY or FITNESS 
FOR A PARTICULAR PURPOSE. 
Please refer to the detailed terms and conditions thereof shown 
in our website below.
http://panasonic.jp/support/global/cs/audio/oss/all8_3_1c.html
At least three (3) years from delivery of this product, Panasonic will give 
to any third party who contacts us at the contact information provided 
below, for a charge no more than our cost of physically performing 
source code distribution, a complete machine-readable copy of the 
corresponding source code covered under GPL V2.0, LGPL V2.1 or the 
other licenses with the obligation to do so, as well as the respective 
copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for 
free in our website below.
http://panasonic.net/avc/oss/
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in 
compliance with the essential requirements and other relevant 
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our 
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, 
Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in the following countries.
GB, DE, AT, BE, DK, SE, FR, IT, ES, NL, FI, GR, PT, PL, HU, CZ, SK, 
EE, LV, LT, SI, BG, RO, MT, CY, IE, LU, HR, NO, CH, IS, LI, TR
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used 
inside buildings.
This product on purpose to connect to access point of 2.4 GHz 
or 5 GHz WLAN.
Product Identification Marking is located on the bottom of the unit.
Manufactured by:
Panasonic Corporation
Kadoma, Osaka, Japan
Importer for Europe:
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, 
Germany
Panasonic Corporation
Web Site: http://www.panasonic.com
C Panasonic Corporation 2015
p
 
EG EB
SC-ALL2-EGEB-QSG~RQT0A31-B.book  1 ページ  2015年5月18日 月曜日 午後1時46分