Panasonic SC-HTB8 Benutzerhandbuch
18
VQT5J41
No sound.
≥ Turn muting off. (> p. 15)
≥ Check the connections to the other device. (> p. 8)
≥ Make sure that the received audio signal is compatible
≥ Check the connections to the other device. (> p. 8)
≥ Make sure that the received audio signal is compatible
with this system. (> p. 21)
≥ Turn this system off and then on again.
≥ If the connections are correct, there might be a problem
≥ If the connections are correct, there might be a problem
with the cables. Redo the connections with different
cables.
cables.
≥ Check the audio output settings on the connected device.
The volume is lowered when the main unit is
turned on.
turned on.
If the main unit is turned off with the volume setting in the
greater half (above 50), the main unit will automatically
lower the volume to the middle (50) when the main unit is
turned on. (> p. 16)
greater half (above 50), the main unit will automatically
lower the volume to the middle (50) when the main unit is
turned on. (> p. 16)
The dialog is too persistent or the dialog does
not sound natural.
not sound natural.
This system has a function to make the dialog stand out
when the volume is low. (> p. 15)
when the volume is low. (> p. 15)
There is no audio.
The power of the main unit turns off
automatically.
The power of the main unit turns off
automatically.
(When the main unit detects a problem, a safety measure
is activated and the main unit automatically switches to
standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?
is activated and the main unit automatically switches to
standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?
If so, lower the volume.
≥ Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few
moments and then try to turn it on again.
moments and then try to turn it on again.
If the problem persists, check if the TV indicator and the
BD/DVD indicator are blinking first. After checking the
indicators, turn off this system, unplug the AC power
supply cord, and consult your dealer. Make sure to
remember which indicators were blinking and inform the
dealer of them.
BD/DVD indicator are blinking first. After checking the
indicators, turn off this system, unplug the AC power
supply cord, and consult your dealer. Make sure to
remember which indicators were blinking and inform the
dealer of them.
Sound
SC-HTB8P_VQT5J41_P.book 18 ページ ２０１４年３月２４日 月曜日 午前１０時３５分