Dimplex Electric Fireplace Benutzerhandbuch
QUICK REFERENCE GUIDE
FOR THE OPTIFLAME ELECTRIC FIREPLACE
1. Prior to the first use of the fireplace verify the following:
•
Are the circuit breakers for the fireplace on?
•
Are the light bulbs in your fireplace loose? (to check, follow
the instructions for replacing the light bulbs under the
maintenance section of this manual)
the instructions for replacing the light bulbs under the
maintenance section of this manual)
2. The heater on your fireplace may emit a slight, harmless odor
when first used. This odor is a normal condition caused by the
initial heating of internal heater parts and will not occur again.
initial heating of internal heater parts and will not occur again.
3. If your heater does not emit heat, ensure the large switch is on,
that the first two red indicator lights are on (for BF36E both
switches on the unit should be on and there are no red indicator
lights), the wall thermostat is set above the current room
temperature and any wall switches for the unit are on. If this does
not work, switch the unit off for 5 minutes and try again. Consult
operation section of your practical users guide for further
information.
switches on the unit should be on and there are no red indicator
lights), the wall thermostat is set above the current room
temperature and any wall switches for the unit are on. If this does
not work, switch the unit off for 5 minutes and try again. Consult
operation section of your practical users guide for further
information.
4. The information regarding the model of your fireplace can be
found on the rating plate located under the logs in the lighting
area.
area.
5. If you have any technical questions, questions regarding the
operation of your fireplace , or require service for your fireplace
contact Dimplex North America customer service at 1-888-
DIMPLEX (1-888-346-7539).
contact Dimplex North America customer service at 1-888-
DIMPLEX (1-888-346-7539).