Philips DVDR5520H/05 Benutzerhandbuch

89

(underlined options are the factory default settings)

The picture shape can be adjusted to fi t your TV. 

{ 4:3 Letterbox } –For a ‘wide-screen’ display with 
 

  black bars on the top and bottom.

{ 4:3 Panscan } –   For a full-height picture with the 
  

sides 

trimmed.

{ 16:9 Widescreen } – For wide-screen TV 
 

  (frame ratio 16:9). 

Select the type of video output that matches the video 
connection between this recorder and your TV.
{ SCART (RGB) } – For SCART connection.
{ Comp. Video (YUV) } – For Component video connection.  

To enable progressive scan feature, go to 
{ Video format } setting.

{ HDMI output }   – For HDMI connection.

Note:  Video output setting is not required for S-Video or 
Composite (CVBS) video connection. 

This feature is only applicable to Component video connection.   
You can choose between progressive and interlaced video 
format, check your TV for compatibility. 
{ Progressive }  – Turn on progressive scan mode.  Select this 

if your TV is progressive-scan compatible.  

{ Interlaced } 

– For TV that is not compatible with 

progressive-scan video.

  If you choose a setting that is incompatible with your TV, 

you may not be able to see any picture at all.  In this case, 

wait 

for 15 seconds for auto recovery or turn off the progressive 
scan as below:
1)  Disconnect this unit’s ~MAINS from the power supply.
2)  Hold down . on this unit whilst reconnecting its 

~MAINS to the power supply.