Philips DVDR5520H/05 Benutzerhandbuch

96

Press OK on the remote control to make a completely new 
digital TV and radio install. This process may take several 
minutes. Once complete, press BACK on the remote control 
to exit.

Press OK to update new digital TV and radio installation.
This adds only the new channels to your existing preset list, 
after the last free preset position. Once complete, press BACK 
on the remote control to exit.

Note:  New channels refer to the channels that are currently 
not installed.

Press OK to display signal strength and quality information of 
the digital tuner.  It will help to fi nd the best position of your 
digital terrestrial antenna. 

Use 

 

 keys to change the frequency and press OK to check 

the signal strength and quality.  

Change the order of the stored channels according to your 
preference.
{ Digital TV } 

– Set the preset order for digital TV channels.

{ Digital Radio } – Set the preset order for digital radio 

channels. 

1)  Select the channel that you want to move and press B.
2)  Move the selection bar to the preset number for which you 

want to place the channel and press b or OK to confi rm.

Defi ne your favourite channels that can be quick accessed by 
using the programme up/down button (P +-) on the remote 
control.
{ Digital TV } 

– Set list of favourite digital TV channels.  

{ Digital Radio } – Set list of favourite digital radio channels. 

X

  –  Mark (or unmarked) your favourite channels using the 

OK button on the remote control.

Note:  Unmarked channels   can only be accessed by pressing 
the corresponding number button on the remote control.

 

   

Check the antenna connection and position.
Position the antenna to reach best signal quality.

Frequency

Signal strength
Signal quality

045.00