Cisco 10GBASE-LX4 X2 Module for MMF X2-10GB-LX4 Datenbogen

Produktcode
X2-10GB-LX4
Seite von 5
 
 
Data Sheet 
© 2007-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 
Page 2 of 6 
information on mode conditioning patch cord requirements please see: 
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html
Cisco X2-10GB-LX4 
The Cisco 10GBASE-LX4 Module supports link lengths of 300m on standard FDDI grade MMF. To 
ensure that specifications are met, the transmitter output should be coupled through a mode 
conditioning patch cord. For additional information on mode conditioning patch cord requirements 
please see: 
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-
530836.html
Cisco X2-10GB-SR 
The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. 
Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.  
Cisco X2-10GB-LR 
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode 
fiber (SMF, G.652). 
Cisco X2-10GB-ER 
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-
mode fiber (SMF, G.652). 
Cisco X2-10GB-ZR: Supports link lengths of up to about 80 km on SMF. This interface is not part 
of the 10 Gigabit Ethernet standard but is built according to Cisco optical specifications. 
Technical Specifications 
Platform Support 
Cisco X2 modules are supported on Cisco switches and routers. For more details, refer to the 
document Cisco Xenpak/X2 Compatibility Matrix. 
Connectors and Cabling 
Connectors: Dual SC/PC connector (-SR, -LR, -LX4, -ER); InfiniBand 4x connector (-CX4) 
Note:  
  Only connections with patch cords with PC or UPC connectors are supported. Patch 
cords with APC connectors are not supported. All cables and cable assemblies used must be 
compliant with the standards specified in the standards section.  
Table 1 provides cabling specifications for the Cisco X2 modules. 
Table 1. 
X2 Port Cabling Specifications 
Cisco X2 
Wavelength (nm) 
Cable Type 
Core Size 
(microns) 
Modal Bandwidth 
(MHz*km) 
Cable Distance* 
Cisco X2-10GB-CX4 
– 
CX4 (copper) 
– 
– 
15m 
Cisco X2-10GB-SR 
850 
MMF 
62.5 
62.5 
50.0 
50.0 
50.0 
160 
200 
400 
500 
2000 
26m  
33m  
66m 
82m 
300m 
Cisco X2-10GB-LRM 
1310 
MMF 
62.5 
50.0 
50.0 
500 
400 
500 
220m 
100m 
220m