Sony 32" BRAVIA™ S-Series LCD HDTVKDL-32S2000 KDL-32S2000E Handbuch
Produktcode
KDL-32S2000E
10
Getting Started
Connecting the TV
To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect
ratio (see “Changing the Wide Screen Mode” on page 20). It is strongly
recommended to connect the antenna/cable input using the supplied 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible.
You can also connect a variety of optional equipment to your TV (see page
13). For multiple equipment connections, please refer to the Quick Setup
Guide.
select the correct Wide Mode to display the picture in the correct aspect
ratio (see “Changing the Wide Screen Mode” on page 20). It is strongly
recommended to connect the antenna/cable input using the supplied 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible.
You can also connect a variety of optional equipment to your TV (see page
13). For multiple equipment connections, please refer to the Quick Setup
Guide.
Cable System or
VHF/UHF Antenna
System
VHF/UHF Antenna
System
Cable or VHF/UHF (or VHF only)
From the
Setup
settings, select
Cable On
or
Cable Off
for your type of input signal.
Cable Box/Digital
Cable Box
Cable Box
Use this hookup if
s
s
You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
signals requiring a cable box to view all channels, and
s
You do not intend to hook up any other audio or video equipment to
your TV.
your TV.
Also, set
Cable
to
On
in the
Setup
settings (see page 31).
75-ohm coaxial
cable (supplied)
Rear of TV
VHF/UHF input
z
To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Scan will fix the
channel automatically.
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Scan will fix the
channel automatically.
75-ohm coaxial
cable (supplied)
Cable
IN
jack
OUT
jack
Rear of TV
VHF/UHF input