Fujitsu Intel Xeon X3210 S26361-F3239-E321 Datenbogen
Produktcode
S26361-F3239-E321
Quad-Core Intel® Xeon® Processor 3200 Series Datasheet
93
Boxed Processor Specifications
7.3.2
Fan Speed Control Operation
The boxed processor fan heatsink is designed to operate continuously at full speed to
allow maximum user control over fan speed. The fan speed can be controlled by
hardware and software from the motherboard. This is accomplished by varying the duty
cycle of the CONTROL signal on the 4th pin (see
allow maximum user control over fan speed. The fan speed can be controlled by
hardware and software from the motherboard. This is accomplished by varying the duty
cycle of the CONTROL signal on the 4th pin (see
). The motherboard must
have a 4-pin fan header and must be designed with a fan speed controller with PWM
output and Digital Thermometer measurement capabilities. For more information on
specific motherboard requirements for 4-wire based fan speed control see the Quad-
Core Intel
output and Digital Thermometer measurement capabilities. For more information on
specific motherboard requirements for 4-wire based fan speed control see the Quad-
Core Intel
®
Xeon
®
Processor 3200 Series Thermal and Mechanical Design Guidelines.
The Internal chassis temperature should be kept below 39ºC. Meeting the processor's
temperature specification (see
temperature specification (see
) is the responsibility of the system integrator.
The motherboard must supply a constant +12 V to the processor's power header to
ensure proper operation of the fan for the boxed processor. See
ensure proper operation of the fan for the boxed processor. See
for specific
requirements.
§
Figure 7-8. Boxed Processor Fan Heatsink Airspace Keepout Requirements (Side 2 View)