Philips Streamium Wireless Music Center WAC700 Benutzerhandbuch
34
English
MUSIC BROADCAST
MUSIC BROADCAST allows you to
broadcast music from Center to Station (s).
broadcast music from Center to Station (s).
On Station(s)
1
Check you have selected HD/AUX source on
the Station(s) or have switched the Station(s) to
standby mode (see Basic functions, Switch
on/to standby and selecting functions)
the Station(s) or have switched the Station(s) to
standby mode (see Basic functions, Switch
on/to standby and selecting functions)
On Center
2
During HD playback, select the album or playlist
you wish to broadcast to Station(s)
you wish to broadcast to Station(s)
3
Press MUSIC BROADCAST to activate
➜
The icon
appears on Center and
Station(s). 5-second countdown starts
➜
On Center and Station (s): Selected
music plays simultaneously several seconds after
the 5-second countdown
4
For a station to exit MUSIC BROADCAST,
press STOP/
Ç on the Station
●
To broadcast music to the station again, you have
to stop MUSIC BROADCAST on Center
and then, activate MUSIC BROADCAST
again on Center
to stop MUSIC BROADCAST on Center
and then, activate MUSIC BROADCAST
again on Center
5
To stop MUSIC BROADCAST, press STOP/
Ç on the Center
Helpful hints: MUSIC BROADCAST will
also stop when:
– you switch Center to Standby or Eco power;
– the selected album or playlist has reached
the end.
also stop when:
– you switch Center to Standby or Eco power;
– the selected album or playlist has reached
the end.
HD
Station management
Adding a station
You can add a station to an existing Wi-Fi
network of Center and Station. Up to 5
WAS700 stations can be connected to a
WAC700 Center.
network of Center and Station. Up to 5
WAS700 stations can be connected to a
WAC700 Center.
On Center
1
Switch on WAC700 Center and select HD
source
source
2
To select Add New Station on Center
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
➜
You will enter the Installation Mode.
Searching for the new station start
➜
Playback stops on the previously associated
Station if you are playing the HD source
On Station
3
Connect the new station to power supply
4
Select AUX mode and enter Installation
Mode by:
Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
On Center
5
Press STOP/
Ç on the Center when all the
stations are found
Helpful hints:
– To change your setting of Wi-Fi connection, see
the manual Connect to your PC.
– To change your setting of Wi-Fi connection, see
the manual Connect to your PC.
p001-p048_WACS700_EngNEW2
9/16/2005, 09:48
34