Epson 20020 Benutzerhandbuch

Use this same procedure if you need to change the setting
for a second hard disk drive installed in your computer

(drive D).

5. When all the disk drive settings are correct, highlight

** SAVE SETTINGS 

** and press 

Enter.

The real-time clock in your computer keeps track of the time

and date at all times-even when the computer 

is 

turned off.

Use the 

Real-time clock 

option to set the time and

date for your computer after you set it up. You may need to use

it again later to adjust the time for daylight savings time. The

computer automatically changes the date for leap years.

Note

Another way to change the real-time clock's time and date

is with the MS-DOS (version 3.3 or later) TIME and DATE

commands. See your MS-DOS Reference Manual for
instructions.

Follow these steps to set the real-time clock:

1. Highlight 

Real-time clock 

and press 

Enter. You

see the current setting for the time and date:

17: 10: 54      Time

03 - 21 - 1989     Date

2. To change the time, highlight 

Time 

and press 

Enter.

This box appears:

hh : mm : ss

—