Alamo TS-100A Benutzerhandbuch

© 2004 Alamo Group Inc.

Page 1 - 2

Interstater  (NH TS-100A , 115A , 125A  & 135A  Asy.   Manual) 06/04

PRE-DEL  INSPECTION CHECKLIST

Pre-Operation Inspection: 

Check the following items before operating the unit to

assure that they are properly assembled. (See following page 1-4  for component location)

___

Operators Manual is with Unit.

___

The Safety Decals are installed as listed in the Assembly Manual.

___

Valve operation plate is installed.

___

Operators cage or Tractor Cab is in place

___

Deflectors are installed on the Mower Head

___

Tractor Rops or Cab with seatbels installed properly.

___

All Foot Guards and safety switch are installed and functional.

___

Axle Plate Bolts are torqued.

___

Head Mounting Bolts tightened.

___

Frame attaching Bolts tightened.

___

Front Support Bolts are torqued.

___

Hydraulic Tank mounting Pins / Bolts in place correctly.

___

All Welds inspected toinsure proper welds and locations.

___

Oil Level in Hydraulic Tank is within the sight gauge. (Item 5 page 1-4)

___

Hose connections are tight.

___

Hoses do not have any kinks or twist in them.

___

Front Pump Shaft adapter bolts are tight.

___

Front Pump Shaft Coupler / Drive Shaft is lubricated and has an anti-seize compound
on the Splines of Pump and Shafts.

___

The Pump Drive Shaft has correct alignment.

___

Suction Hose has no leaks or kinks.

Skid Shoe Bolts are torqued to 120 ft-lbs

Motor Bolts are torqued to 120 ft-lbs

Belt Alignment& tension adjustment is correct.

Cutter shaft bearings are properly lubricated

Roller bearings are properly lubricated

Blades swing freely.

___

All Pins and Clips for Rear Mower are installed

___

Clutch on Rear Mower has been checked for proper adjustment and conditions per
parts book reguirments.

___

All Belt guards are installed correctly.