Apple 2 Benutzerhandbuch

Safety, Handling, & Support 

To send video or audio to an AirPlay device such as an Apple TV, iPad and the AirPlay device 
must be connected to the same wireless network. If you don’t see the   button, iPad isn’t 
connected to the same Wi-Fi network as an AirPlay device, or the app you’re using doesn’t 
support AirPlay.

 

•

When sound or video is being sent to an AirPlay device, iPad doesn’t display video or play 
audio. To direct the content to iPad and disconnect iPad from the AirPlay device, tap   and 
select iPad in the list.

 

•

Some apps play only audio over AirPlay. If video isn’t working, make sure that the app you’re 
using supports both audio and video.

 

•

If the Apple TV has been set up to require a passcode, you must enter it on iPad when asked, 
in order to use AirPlay.

 

•

Make sure the speakers on the AirPlay device are turned on and turned up. If you’re using an 
Apple TV, make sure the TV’s input source is set to Apple TV. Make sure the volume control on 
iPad is turned up.

 

•

When iPad is streaming with AirPlay, it must remain connected to the Wi-Fi network. If you 
take iPad out of range, playback stops.

 

•

Depending on the speed of your network, it may take 30 seconds or more for playback to 
begin when using AirPlay.

For more information about AirPlay, see 

.

When you connect iPad to a TV or projector using a USB cable, the attached display 
automatically mirrors the iPad screen. Some apps may support using the attached display as a 
second monitor. Check the app’s settings and documentation.

 

•

To view HD videos in high resolution, use the Apple Digital AV Adapter or a component  
video cable. 

 

•

Make sure the video cable is firmly connected at both ends, and that it’s a supported cable. 
If iPad is connected to an A/V switchbox or receiver, try connecting it directly to the TV or 
projector instead.

 

•

Make sure that your TV has the proper video input selected, such as HDMI or 
component video.

 

•

If no video appears, press the Home button, disconnect and reconnect the cable, and 
try again.

Sell or give away iPad?

Before you sell or give away your iPad, be sure to erase all content and your personal information. 
If you’ve enabled Find My iPad (see 

 on page 35), Activation Lock is on. You need to 

turn off Activation Lock before the new owner can activate iPad under his or her own account. 
Erase iPad and remove Activation Lock. Go to Settings > General > Reset > Erase All Content 
and Settings.

See 

.