Dixon 36 Benutzerhandbuch

36-

DIXON

MAINTENANCE

Your mower is equipped with a maintenance free 

battery and does not need servicing. However, 

periodic charging of the battery with an automotive 

type battery charger will extend its life.

Keep battery and terminals clean.

1. 

Keep battery bolts tight.

2. 

Recharge at 6-10 amperes for 1 hour

3. 
Cleaning battery and terminals
Corrosion and dirt on the battery and terminals can 

cause the battery to “leak” power.

Lift seat and rotate forward.

1. 

Disconnect BLACK battery cable first, then 

2. 

the RED battery cable and remove the battery 

from the machine.
Rinse the battery with plain water and dry.

3. 

Clean terminals and battery cable ends with 

4. 

wire brush until shiny.
Coat terminals with grease or petroleum jelly

5. 

Reinstall battery.

6. 
Replacing battery

Lift seat and rotate forward.

1. 

Open terminal access doors.

2. 

Using two ½” wrenches disconnect BLACK 

3. 

battery cable then RED battery cable.
Position deck to lowest setting.

4. 

Front underside of frame, remove the nuts that 

5. 

secure the battery hold-down.
Carefully remove the battery from the mower.

6. 

Install new battery with terminals in the  same 

7. 

position as the old battery.
Reinstall battery hold-down and secure with 

8. 

nuts removed in Step 5.
First connect RED battery cable to positive (+) 

9. 

battery terminal with hex bolt and hex nut.
Connect BLACK grounding cable to negative 

10. 

(-) battery terminal with remaining hex bolt and 

hex nut
Tighten securely.

11. 

Lower seat

12. 

8050-109