LOEWE A 32 HD+ 100 Benutzerhandbuch

45 -

You can connect a PC to the PC IN socket for example 
and thus use the TV screen as a monitor.

➠  When connecting a PC or accessory equipment to the PC IN socket 

of the TV set, set one of the following screen resolutions on the PC / 
accessory equipment first.

60 Hz (SVGA)

1024 x 768 60 Hz (XGA)

1280 x 1024 60 Hz (SXGA)

1360 x 768 60 Hz (WXGA)

(SDTV)

(SDTV)

(SDTV)

(SDTV)

(HDTV)

(HDTV)

➠  There is no need to register the device with the connec-

tion wizard.

Switch off all equipment before connecting.

Connect the device to the TV set’s PC IN socket with a VGA 
cable.

Connect the analogue audio signal of the PC to the AUDIO 

IN2 jack on the TV set with a stereo cable.

Alternatively, connect the digital audio output of the PC or 
accessory equipment to the AUDIO DIGITAL IN socket of 
the TV set with a cinch cable.
The digital audio input can be assigned to the PC IN socket 
by TV menu 

→ Connections → Miscellaneous → Assign digi-

tal audio input, see page 49.

Call AV selection.

 

 

Select PC IN socket,

  OK switch over.

Adapt geometry (only possible with certain signals)
This can be used to position the picture correctly and move the position 
of the picture (horizontally and vertically) so that it fills out the whole 
screen. 

Call TV menu.

 

 Select  Geometry,

 

 

go to the menu line below.

 

 

Select the desired setting,

 

  go to the menu line below.

 

Make settings.

Call TV menu.

 

 Select  Picture,

 

 

go to the menu line below.

 

Select and set Colour standard:

    RGB or
    Ycc / Ypp

The colours will not be shown correctly if the wrong 
standard is set.

DIG-OUT

MIC

IN

OUT

TV set

PC

PC IN

AUDIO IN2

Connection 

example of a 

computer

OK

OK

END

Switch to ...

COMP. IN
HDMI2/DVI
HDMI1/DVI
PC IN
AVS
DVD-REC
DVD
VIDEO

AV selection

33156_024_Xelos_A32_42_GB_9_00_B45   45

33156_024_Xelos_A32_42_GB_9_00_B45   45

03.07.2008   15:39:05

03.07.2008   15:39:05