Approach Tech DVR-3024M Benutzerhandbuch

UPDATE:

Updates system software.

Note: The log keeps history of the operations

statues on a revolving basis because of a

limit of 4000. When the log is full, the

newly registered record of an operation

will replace the existing records from the

oldest one.

OSD LANGUAGE:

This option allows you to select the OSD

language display as

English

Chinese

MENU BACKGND:

There are

levels of background color

transparencies you can choose from: level 1 is

totally transparent, level 3 is opaque, and level

2 is between levels 1 and 3. The background

color is used in the setup menu and the search

functions.

BUZZER:

This option determines the embedded buzzer

will sound a tone to signal the following

situations. A tone lasts about two seconds

long.

ON: Enables buzzer.

OFF: Disables buzzer.

Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDDs

PASSWORD:

This option allows you to set a password to

prevent any unauthorized re-formatting of the

hard disk drives or use by the Viewer

Software. The standard password is “9999”.

OLD PASSWORD: Enter the pre-set

password (or the standard

password if this is the initial setting)

to access the password setting

system.

NEW PASSWORD: Enter a 4-digit-number

password of your choosing which

will replace the pre-set password

(or the standard password “9999”).

SETUP PWD:

When this option is on, the user must pass the

password check before entering the setup

menu.

ON: Enables pass protection for the setup

menu.

OFF: Disables pass protection for the setup

menu.

DEFAULT:

This option allows you to reload the factory

default setting. Please do note that the

password will not be changed in the factory

default setting.

SD SETUP:

The DVR offers a quick setup method by using

an SD card. If the user wants to set up many of

the same devices with the same settings, he

can save the whole settings to an SD card, then

transfer them to another DVR.

SAVE: Saves the whole settings to the

SD card.

LOAD: Loads the whole setting from the

SD card.