Infocus IN2112 Betriebsanweisung

9

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not 

included) to your computer and to the Audio 1 or Audio 2 connector on the 

projector. (Default settings are as follows: Audio 1 is used with VGA 1 and 

VGA 2; Audio 2 is used with S-video and composite.) You can also assign a 

your source to a different audio in connector, see page 23 and page 30

You 

may also need an adapter.
If you are using a desktop computer and want to see the image on your 

computer screen as well as on the projection screen, connect the computer’s 

monitor cable to the Monitor Out connector on the projector.

NOTE:

 Only VGA video is sent to the Monitor out connector.

To advance slides in a PowerPoint presentation using the remote control, 

plug a USB cable between the projector’s USB connector and your computer. 

Then press the up and down arrow buttons on the remote control to move 

through your slides.

IN2114 & IN2116 only: 

To display a presentation from a USB flash drive, see 

the Using LitePort section on page 37. This feature eliminates the need for a 

computer source and can be integrated with common wall plates and con-

ference room input/output panels.

Connect audio cable

Connect monitor cable

Connect USB cable