Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Infocus
  4. IN2112
  5. Betriebsanweisung

Infocus IN2112 Betriebsanweisung

Download
Seite von 45
14
Shutting down the projector
Screen Save Time
You can make the black screen appear after a preset number of minutes by 
turning on the Screen Save Time feature in the Setup menu. See page 29.
Auto Off Time
The projector has an Auto Off Time feature that automatically turns the 
projector off if no active sources are detected and no user interaction with 
the projector is performed for 30 minutes. By default, this feature is off. You 
can change the length of time, see page 29.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. 
The lamp turns off and the LED blinks amber for 10 seconds while the fans 
continue to run to cool the lamp. When the lamp has cooled, the LED lights 
amber and the fans stop. Unplug the power cable to completely power off 
the projector.
Troubleshooting your setup
The Status Indicator Panel on top of the projector indicates the state of the 
projector and is a helpful when troubleshooting.
Table 3: Status indicator light behavior and meaning
Icon
Meaning
Power, solid amber
Power, blinking green
Power, solid green
Power, blinking amber
The projector is plugged in.
The power button has been pressed and 
the software is initializing.
The projector is on and initialized.
The power button has been pressed to 
turn the projector off and the fans are 
running to cool the projector.
Temperature
The projector is too hot. Make sure the 
the projector off and wait one minute, 
then turn the projector on again. Contact 
Technical Support if the problem persists. 
Visit www.infocus.com/support to contact 
service.
Lamp
Turn the projector off and wait one 
minute, then turn the projector on again. 
If the lamp light turns on again, replace the 
lamp and reset the lamp timer
 
Wrench/Service
Turn the projector off and wait one 
minute, then turn the projector on again. 
If the service lamp turns on again, service 
is required. Visit www.infocus.com/
support to contact service.