Infocus IN2112 Betriebsanweisung

Audio Inputs:

Assign an audio input to a specific video/computer source

input. (Default settings are as follows: Audio 1 is used with VGA 1 and

VGA 2; Audio 2 is used with S-video and composite.)

Press up or down to highlight the source you want to change, then press

select or the left and right arrow keys to change that source’s audio input.

Press menu when done changing audio inputs.

Auto Source:

When this feature is On, the projector automatically finds the

active source, checking the selected Power-up Source first. When this fea-

ture is Off, the projector defaults to the source selected in Power-up Source.

To display another source, you must manually select one by pressing the

Source

button on the remote or keypad.

Fast Color Refresh:

Controls color wheel speed.

Power-up Source:

Determines which source the projector checks first for

active video during power-up.

VGA 1 SCART:

If a SCART source is connected to VGA 1 (using an adapter),

use this feature to select the SCART type.

VGA 2 SCART:

If a SCART source is connected to VGA 2 (using an adapter),

use this feature to select the SCART type.

Video Standard:

When this feature is set to Auto, the projector attempts to

automatically pick the video standard based on the input signal it receives.

(The video standard options may vary depending on your region of the

world.) If the projector is unable to detect the correct standard, the colors

may not look right or the image may appear “torn.” If this happens, manu-

ally select a video standard by selecting NTSC, PAL, or SECAM from the

Video Standard menu.

Closed Captions

: Controls closed caption display while audio is not muted. If

this setting is not off, and audio is not muted, and the source is NTSC and

contains captions on the selected channel, then the projector must display

caption text overlaid on the image.
Ceiling Mount

: Turns the image upside down for ceiling-mounted projection.

Rear Project

: Reverses the image so you can project from behind a

translucent screen.

Auto Keystone

: Enables and disables the projector’s automatic vertical

keystone adjustment.

Prevent PC Screen Saver

: Prevents your computer from going into Screen

Save mode. The projector must be connected to the PC via a USB cable for

this feature to work.

Search Screen

: Allows you to display a blank screen instead of the default

screen at startup, and when no source is detected.

Take Snapshot...

: Captures the current image and allows it to be used as the

search screen image.

Disable Snapshot:

Allows the user to disable the snapshot capability.

Show Messages

: Displays status messages (such as “Searching”) in the lower-

left corner of the screen.

Menu Offset

: Allows you to change the position of the On Screen Display

items.

Menu Transparency

: Allows you to change how much of the projected image

behind the menu you can see. As the value increases, more of the image

behind the menu is visible.

Magnify Controls

: Allows you to change the function of the arrow buttons

when the menu is not shown. By default, the arrow buttons allow you to

advance slides while in PowerPoint’s SlideShow mode. To make the arrow

buttons also adjust magnify settings, choose Magnify Controls to turn

magnify controls on. Now when the menu is not shown, you can press the

Select button to switch between the magnification settings (Magnify Level,

Magnify Horizontal Position and Magnify Vertical Position), then press

Select again to turn off magnify controls and use the arrow buttons to

advance slides.

Keypad Enable:

Enables or disables keypad.

Glow Ring:

Controls the brightness level of the glow ring status indicator.