Infocus IN35 Benutzerhandbuch
28
Settings menu
Audio
: allows adjustments to the volume and balance, and turns the projec-
tor’s startup Chime on and off.
Sources
:
allows you to assign a particular input to a specific source key
when using an optional remote. Also allows selection of a default Power-up
Source and enables or disables Autosource.
Source and enables or disables Autosource.
Sources>Power-up Source:
this determines which source the projector
checks first for active video during power-up.
Sources>Autosource:
When Autosource is not checked, the projector
defaults to the source selected in Power-up Source. If no source is found, a
blank screen displays. When Autosource is checked, Power-up Source
determines which source the projector defaults to at startup. If no signal is
present, the projector checks the sources in order until a source is found or
until power down. When Autosource is selected, the Source Enable fea-
ture indicates which sources the projector attempts to lock onto. You can use
the Source Enable feature to eliminate certain sources from this search,
which will speed the search. By default, the check boxes for all sources are
checked. Uncheck a source box to eliminate it from the search. When Auto-
source is not checked, the projector defaults to Computer 1 initially, then
defaults to whatever source is selected in the Power-up Source menu. To
display another source, you must manually select one by pressing the
Source
blank screen displays. When Autosource is checked, Power-up Source
determines which source the projector defaults to at startup. If no signal is
present, the projector checks the sources in order until a source is found or
until power down. When Autosource is selected, the Source Enable fea-
ture indicates which sources the projector attempts to lock onto. You can use
the Source Enable feature to eliminate certain sources from this search,
which will speed the search. By default, the check boxes for all sources are
checked. Uncheck a source box to eliminate it from the search. When Auto-
source is not checked, the projector defaults to Computer 1 initially, then
defaults to whatever source is selected in the Power-up Source menu. To
display another source, you must manually select one by pressing the
Source
button on the remote or keypad. This cycles through all the sources
that are selected in the Source Enable menu.
System>OSD Offset:
allows you to change the position of the On Screen
Display items.
Rear:
reverses the image so you can project from behind a translucent
screen. Ceiling: turns the image upside down for ceiling-mounted projec-
tion.
tion.
Low Power
: Turn this on to lower the light output of the lamp. This also
lowers the fan speed, making the projector quieter.
Auto Power
: When Auto Power is checked, the projector automatically
goes into the startup state after power is applied. This allows control of ceil-
ing mounted projectors with a wall power switch.
ing mounted projectors with a wall power switch.
Display Messages
: displays status messages (such as “Searching” or
“Mute”) in the lower-left corner of the screen.
Audio
Settings
Sources
System