Panasonic PV-GS36 Betriebsanweisung

•  The Red Lamp lights up and the camera will be 

put into recording pause approx. 1.7 seconds 
after it is turned on.

„

Set [   SETUP] >> [ 

 QUICK START] >> [OFF].

•  If the standby continues for approx. 30 minutes, 

then the Lamp (Green) will go off and the 
Camcorder will be completely turned off.

•  The Green Lamp 

 lights up and the unit goes 

into Quick Start Standby mode.

•  Please note in Quick Start Mode approximately 

half the pause recording power is being consumed. 
Using Quick Start Mode will reduce the battery 
recording/playback time.

•  This function is only activated in the following 

cases:
-  A tape or a card is inserted while the Tape 

Recording Mode is set.

-  A card is inserted while the Card Recording Mode 

is set.

•  When you set [   POWER SAVE] to [5 MINUTES] 

and the Camcorder is left in the Recording Pause 
Mode for 5 minutes,the unit will turn off. (Green 
LED will lit up.) Close the LCD Monitor and retract 
the Viewfinder. To turn the Camcorder on open the 
LCD Monitor and/or the Viewfinder.

•  If the Mode Dial is moved or the battery is removed 

in Quick Start standby mode, Quick Start is 
canceled and the power turns off even if the [OFF/
ON] Switch is set to [OFF]. (However, changing the 
mode between Tape Recording Mode and Card 
Recording Mode will not cancel Quick Start.)

•  When the Camcorder is Quick-Started with the 

White Balance on automatic, it may take some time 
until the White Balance is adjusted if the scene 
being recorded has a light source different from the 
scene last recorded. (When the MagicPix Function 
is used, however, the White Balance of the scene 
last recorded is retained.)

•  If the power is turned on in Quick Start standby, the 

zoom magnification becomes 5× and the picture 
size may differ from what it was before Quick Start 
standby.

•  When using the AC Adaptor, Quick Start can be 

used even if a tape is not inserted.

When Quick Start is ON the battery power is still 
being consumed, even when the LCD Monitor and 
the Viewfinder are closed.
The Camcorder will resume recording/pause mode 
about 1.7 seconds after the LCD Monitor and the 
Viewfinder are reopened.

•  The subject should be within 4.9 feet (1.5 meters) 

of the Camcorder.

•  Using the LED Video Light reduces battery time.
•  Set the LED Video Light to off when not in use.
•  Do not look directly into the light.
•  If the LED Video light is used with a Conversion 

lens attached, a slight vignetting (darkening around 
edges) effect occurs on the screen.

•  Using the MagicPix Function at the same time will 

make conditions even brighter.

•  The LED video light enables simply lightening 

the images taken in a dimly-lit place. We also 
recommend using it in a bright place to obtain high 
quality images.

When you set the self-timer, the recording starts 
automatically after 10 seconds on the Card.

1/2 NEXT

[One-Touch Navigation icon]

•  The [SELF-TIMER ON] and the [   ] Indication 

appears.

• The [   ] Indication flashes and the recording 

starts after 10 seconds. After recording, the 
Self-Timer will be canceled.