Panasonic PV-GS19 Betriebsanweisung

Seite von 80
27
Recording Mode
To brighten the natural colors in a scene. Gain Up 
mode works with the Built-in Video Light to enhance 
the light’s brightness.
• Set to Tape/Card Recording Mode.
1
  Press the [LIGHT] Button 
33
1
Recording with the  Built-in LED 
Video Light (For PV-GS31/PV-GS35)
•  The Built-in LED Video Light lights and the Gain 
Up mode is set to on.
•  Gain Up mode will be brighter than when only 
the Video Light is on, however, ghost images 
will appear.
2
  Press the [LIGHT] Button. 
2
•  Gain Up mode is set to off.
•  To eliminate ghost images, use this mode.
3
  Press the [LIGHT] Button. 
3
•  The Video Light turns off.
•  Pressing the [LIGHT] Button again returns to 
1
.
1
2
3
•  For other notes concerning this item, see page 60.
33
•  When [ON] is selected, the still pictures can be 
recorded in approximately 0.5 second intervals until 
the [PHOTO SHOT] Button is released or 10 pictures 
are recorded.
2
  Press and hold the [PHOTO SHOT] Button 
25
.
 Recording Yourself
•  For other notes concerning this item, see page 60.
 RapidFire Consecutive Photoshot
• The [   ] Indication appears.
The still pictures can be recorded on a Card at regular 
intervals.
1
 Set 
[   ADVANCE] >> [   BURST MODE] >> 
[ON].
„
 Maximum number of still pictures 
recordable on an SD Memory card 
(optional)
PICTURE QUALITY
 (High)
 (Normal)
32 MB
220
440
64 MB
440
880
128 MB
880
1 760
256 MB
1 760
3 520
512 MB
3 520
7 040
1 GB
7 040
14 080
35
30
1 2 : 3 4 : 5 6 A M
J A N     2   2 0 0 5
25
•  The numbers shown in the table are approximations.
•  These figures vary depending on the subject being 
photographed.
„
 To Stop the RapidFire Consecutive 
Photoshot in Progress
Release the [PHOTO SHOT] Button.
You can record yourself while viewing the LCD 
Monitor. You can record persons in front of the 
camera while showing them the image. The image is 
horizontally flipped as if you see a mirror image. (The 
image to be recorded is the same as that recording.)
• Set to Tape/Card Recording Mode.
•  When the LCD Monitor is opened, the Viewfinder 
will be automatically turned off. If the LCD Monitor 
is rotated towards the lens side through, then the 
Viewfinder will be activated.
•  When the LCD Monitor is rotated towards the lens 
side, the One-Touch Navigation icon will not be 
displayed even if you press the center of the Joystick 
Control.
1
  Rotate the LCD Monitor 
2
 towards the 
lens side.