Ashly XR-4001 Техническое Руководство

XR-4001

 The unit shall be a stereo four-way 24dB per

octave electronic crossover in a two rack space

metal chassis. The unit shall have separate front

panel input level controls on all channels for inter-

facing with broad range of nominal system levels.

Unity gain operation must be achievable by setting

these controls at the “U” position. Each of the unit’s

channels shall have independent, infinitely variable

adjustment of crossover frequency with controls

located on the front panel. This control shall pro-

vide a total range of 200:1 when used in conjunc-

tion with the unit’s adjacent Range switch. There

shall be a Response control calibrated in decibels

on each channel to adjust the damping of that filter

at the crossover point, thus allowing variable sys-

tem response adjustment to specific site require-

ments. The unit shall have separate clip indicators

to monitor all internal amplifiers for any possible

overload conditions. Each channel of the crossover

unit shall have a separate output level control and

mute switch located on the front panel. There shall

be separate inputs and outputs for each channel

on 1/4” TRS phone jacks and XLR connectors, any

of which may be used balanced or unbalanced.

In addition, there shall also be an independent

mono summed output labeled MONO LOW OUT (on

a separate 1/4” TRS jack and an XLR jack). The

crossover must be covered under a limited full Five

Year warranty. The shipping weight shall be sixteen

pounds, with an overall depth of eight inches. The

crossover shall be the Ashly model XR-4001. No

other unit shall be acceptable unless data submitted

from an independent test laboratory verifies that

the above specifications are fully met or exceeded.

ARCHITECTS SPECIFICATIONS

TECHNICAL NOTES & SPECIFICATIONS

XR-4001 Stereo 4-Way Crossover

Features:

• 5-Year Worry-Free Warranty

• 24dB Per Octave Slopes

• Variable Filter Response

Allows Tuning-In Linkwitz-

Riley or Other Filter

Performances

• Output Mute Switches

• XLR and 1/4” Inputs and

Outputs

• 20Hz Third Order Hi-Pass

Filter

• Extra Wide Tuning Range

• Peak Overload Warning

Lights

• Tamper-Proof Security Covers

Optionally Available

• Safety/Compliance: cTUVus/CE, RoHS