Enterasys 6000 Betriebsanweisung
Syst em Events
18-5
Event Messages
A list of event messages follows, with each message's meaning and any action to be
taken. The list is modified as necessary to include additional events. As shown in the
example under “Displaying Events" (on page 18-3), each message is preceded by the
LP (FRX6000, FRM only) and port numbers.
taken. The list is modified as necessary to include additional events. As shown in the
example under “Displaying Events" (on page 18-3), each message is preceded by the
LP (FRX6000, FRM only) and port numbers.
If the recommended action does not correct a problem, contact Cabletron Systems
Technical Support at:
Technical Support at:
●
Phone:
603-332-9400
Monday–Friday, 8 AM–8 PM Eastern time
●
E-mail:
support@ctron.com
●
FTP:
ctron.com
(
134.141.197.25
)
◆
Login:anonymous
◆
Password:Your e-mail address
Messages:
198.
SABM/DISC with wrong link address
Severity:
4
Meaning:
The HDLC frame processor task for the port has received an
improperly addressed frame from the subscriber. This situation
usually occurs when the port and subscriber devices are both con-
figured as logical DCEs or logical DTEs.
improperly addressed frame from the subscriber. This situation
usually occurs when the port and subscriber devices are both con-
figured as logical DCEs or logical DTEs.
Action:
Modify the Port record so that one end of the connection is a logical
DCE and the other is a logical DTE.
DCE and the other is a logical DTE.
219.
Illegal TC/Gen Clk Combination
Severity:
1
Meaning:
The software has determined that a port is set to run at an illegal line
speed (throughput class).
speed (throughput class).
Action:
This is probably a configuration error. Check the Port record and
change the throughput class, if necessary.
change the throughput class, if necessary.
250.
Excessively noisy line
Severity:
3
Meaning:
Self-explanatory.
Action:
Check the communications line and cables.
304.
LP Buf Usage exceeded T:“n” C:“n”
Severity:
4
Meaning:
The LP statistic
Percentage of Buffers in Use
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action:
If this happens frequently, you may need to reroute some traffic.