Enterasys csx400 Betriebsanweisung

Local Management

1-50

Local Management User’s Guide

Version —

The version number of the IP Routing used on the HSIM or CyberSWITCH.

AdminStatusTime —

Displays the amount of time elapsed since an IP address was assigned to

the HSIM or CyberSWITCH.

Description —

Describes the selected Port.

MAC Address —

Displays the physical (MAC) address of the HSIM or CyberSWITCH.

Interf. Type —

Displays the type of interface used by the specified port.

Oper Status —

Displays the operational status of the selected port.

IPX General Configuration Fields

This section provides a general overview of the procedures required to configure the HSIM or
CyberSWITCH. The following list describes each of the IPX General Config fields.

+PORT- —

Use this field to select the routing port that you wish to configure.

Framing —

Use this field to select the format of the Frame in which IPX packets are

encapsulated for transmission.

MTU —

Use this field to set the Maximum Transmission Unit (MTU).

IPX Routing —

Use this field to enable IPX Routing Services.

IPX Forwarding —

Use this field to enable IPX Forwarding.

IPX Address —

Use this field to assign an IPX Address to the port that you wish to configure.

Selecting a Port for Configuration

Routing Services allows you to choose the ports that you want to configure for IPX routing. To
select a router port to configure for IPX routing, complete the following steps:

Use the arrow keys to highlight the PORT option.

Type in the number of the port that you want to configure for IPX routing, then press ENTER.