Enterasys 2200 Betriebsanweisung

VLAN Redirect Configuration Screen

Port Configuration Menu Screens

To add or delete source VLAN and destination port entries and set the Frame Format, proceed as 
follows:

1. Use the arrow keys to highlight the Source VLAN field near the bottom of the screen.

2. Type in the VLAN ID number of the source VLAN to be configured.

Frame Format 
(Read-Only)

See the current frame format setting: RECEIVED, TAGGED or 
UNTAGGED. The default is RECEIVED.

RECEIVED – Frames are redirected in the format that they were 
received by the SmartSwitch device.

TAGGED – Frames are transmitted on the destination port with a 
VLAN tag inserted according to the frame classification of the 
receiving port.

UNTAGGED – Frames are transmitted on the destination port 
without a VLAN tag regardless of the format of the received frame.

Unsupported.

Source VLAN [n] 
(Modifiable)

Enter the VLAN ID of the VLAN that is to be changed to a source 
VLAN. If a VLAN is currently being redirected, it will not display as a 
selectable VLAN. For details, refer to 

Destination Port [n] 
(Selectable)

Select the port number that is to be changed to a destination port. If a 
port is currently being redirected, it will not display as a selectable 
port. For details, refer to 

Frame Format 
(Selectable)

Select the frame format for the transmission of redirected frames on the 
destination port. RECEIVED, TAGGED, or UNTAGGED may be 
selected. Refer to the previously described read-only Frame Format 
field for details about each format. The default setting is RECEIVED.

Unsupported. 

Status 
(Toggle)

Add or delete source and destination ports selected in the Source 
VLAN [n] and Destination Port [n] fields.